The contractor skilled in resurfacing can clean-up, patch-up and resurface a hotel or residential pool deck in just five days, according to Travis Winters, who owns Nebraska Concrete Coatings.
Hotels receive ratings on their appearance and cleanliness with an impact on where travelers choose to book an area. When pool areas show ugly unsightly stains and wear, it can pull lower the hotel’s satisfaction ratings.
The hotel manager desired to renovate the pool and spa area and upgrade the look through swimming pool deck repair California. At the same time he required minimal maintenance to maintain it looking good, so that the actual pool area would rate highly upon guest surveys. Therefore, resurfacing with an acrylic overlay as well as adding a fresh color scheme offered a great choice, but the hotel management wanted minimum disruption for guests. Turn around time was considered.
In addition to chemical and difficult water stains, this indoor hotel pool deck within Nebraska had a rough surface which was unfriendly to bare feet. Children who fell might get badly scraped by the high ridges from the uneven surface. A surface smooth sufficient for barefoot patrons was needed. It also needed slip-resistance for pool safety on the actual wet surface, and good long-term wearability.
Resurfacing concrete pool deck California was hired to wash the pool area and resurface it having a durable and attractive acrylic topping. It suggested adding a border using the appearance of a brick trim to define the edge from the pool and spa and to supply aesthetic appeal and improve visibility from the edge for safety reasons.
NCC first ground down the raised texture from the rough broom finished concrete to improve flatness and supply a good surface for the leading to adhere well. After using a 7-inch diamond grinder along with vacuum that provided a dust-free work place, the surface was washed with muriatic acidity, neutralized and then power washed to supply a clean surface.
Then, cracks and flaws were repaired utilizing a two-component urethane material called CR Quick from concrete pool deck repair Los Angeles.
Next, the skim coat was applied. After drying out, any imperfections in the base had been abraded. Then areas were measured and very carefully taped off to define the borders and also the individual “tile” areas. Travis applied three different colors towards the borders using a small hopper weapon. To cover the large expanse, NCC utilized an air compressor and pump program. Later, light spattering was done to include depth. Accent tiles of the more dark color were added.
The overall project was sealed along with three coats of CCI SuperSeal 2000 to supply high durability and reduced maintenance. About the final day, NCC used grout to seal the pool deck round the walls for a clean appearance. Grouting and repainting from the drains and other details also helped make the entire area look fresh and clean.
For more information about swimming pool deck repair Los Angeles please visit the website here at http://www.rubber-deck.com/